1.HDL Solution

HDL has four different type products: Home automation, Pro Stage Lighting, KNX/EIB series and LED series, and offer solutions as below: Home Automation, Building Automation and Hotel Automation unlimitedly to the following: Lighting and Dimming, HVAC, Home Automation Controllers , Whole House Audio - Media Streaming and Distribution, Motorized Shades, Security and Safety, Switches, Panels and Touch Screens, Stage Lighting, Show Control, DIY Disco and Party Box.

2.How do i control the angle of blind use motor module

use version HDL_MIRACLE_2010/07/27 of firmware, there are two logic group curtain correspond to physical curtain ,means when you control the logic curtain three the physical curtain one will active but the ON time of relay will be 200ms, so we can easy control the angle of blind

3.HDL BUS software show unknown equipment when re-install the latest software on win7 system

 Do as below method  1, uninstall the previous s-bus software  2, install the latest s-bus software again , but not use same folder as  previous 

4.How many versions of touch life software

There are four version for touch life software for HDL Bus home automation , all of version use same software to program 1, 10 inch wireless touch screen with wince operation system 2, 7 inch wall mount touch screen with wince operation system 3, 1024x768 resolution for XP and win7 touch screen 4, 1024x600 resolution for XP and win7 touch screen

5.SMS module notice

you need pay attention to use SMS module 1,you need power Off and power On again when you change a SIM card or insert a new SIM card. 2,send message to the SMS module , there is a message box on the LCD of SMS module will show the message that you sent. 3,make sure the frequency of SIM match the SMS module, our SMS module support 900Mhz, 1800Mhz, 850Mhz,1900Mhz. 4,using RJ45 connection to program SMS module

6.Iridium software helps for HDL Bus system

Please find helps links for iridium software on HDL Bus system. 1) How to generate the iRidium license file (iRidium license)? http://iridiummobile.net/wiki/index.php/Licensing ; 2) iRidium for HDL BUS "Fast start" & "Demo projects" http://www.iridiummobile.net/wiki/index.php/IRidium_for_SMART-BUS ; 3) What is iRidium Client and how to use it? http://www.iridiummobile.net/wiki/index.php/IRidium_Client ; 4) What is iRidium GUI Editor and how to use it? http://www.iridiummobile.net/wiki/index.php/IRidium_GUI_Editor ; 5) What is iRidium Transfer and how to use it? http://www.iridiummobile.net/wiki/index.php/IRidium_Transfer ; 6) What is iRidium Gate and how to use it? http://www.iridiummobile.net/wiki/index.php/IRidium_Gate ; 7) iRidium sample designs (GUIs) http://iridiummobile.net/wiki/index.php/Sample_designs

7.How to identify the address of panel in HDL Bus network

1,The mothed is you push any of button of 6 button switch more than 20 seconds the switch will enter program mode , means you can read and change the address of this switch . 2, For DLP switch ,you just push button 1 and 4 same time , the DLP will show you menu for system setup , you can set the address at this menu